Differences

This shows you the differences between two versions of the page.

--- hardware:dated [2019/01/18 19:16]
Melissa Glidewell created
+++ hardware:dated [2019/01/18 19:42] (current)
Melissa Glidewell [Install the objectives on pre-2015 piezos]
@@ Line 13: / Line 13: @@
 ==== Install the objectives on pre-2015 piezos ====
-Because of the geometrical constraints inherent in having the two objectives so closely mounted together and the need to minimize mechanical stress on the piezos, one of the POMs should be loosened from it’s mount on the SPIM arm. In order to accomplish this, one SPIM arm (components 8-12 in  Figure 1 in the [[manual#overview|diSPIM Manual]]) should be removed in order to access the screws (indicated by red arrows in Figure 1) connecting the POM to the arm mount.
+Because of the geometrical constraints inherent in having the two objectives so closely mounted together and the need to minimize mechanical stress on the piezos, one of the POMs should be loosened from it’s mount on the SPIM arm. In order to accomplish this, one SPIM arm (components 8-12 in [[docs:manual#overview|Figure 1 in the diSPIM Manual]]) should be removed in order to access the screws (indicated by red arrows in Figure 1) connecting the POM to the arm mount.
 To install objectives on pre-2015 piezos,

Trace: