Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revision Previous revision
Next revision Both sides next revision
docs:ospim [2021/01/09 01:45]
Jon Daniels [Micro-Manager plugin] 		docs:ospim [2021/04/05 15:48]
Jon Daniels [Controller firmware]
Line 18: Line 18:
 See the [[hardware:controller#firmware|controller page]] for general information about firmware including instructions to flash it.  Typically oSPIM systems have a scan-optimized XY stage so be sure to do the extra step to set the leadscrew pitch as described on the controller page if the firmware is before version 3.20. See the [[hardware:controller#firmware|controller page]] for general information about firmware including instructions to flash it.  Typically oSPIM systems have a scan-optimized XY stage so be sure to do the extra step to set the leadscrew pitch as described on the controller page if the firmware is before version 3.20.
  
-Here is the download link for the [[https://www.dropbox.com/sh/n93bzxtkrn31us5/AAA_moo_Y06RohB1bXbYjoiAa?dl=1|latest oSPIM firmware package from ASI]] (last updated 22-Mar-2018).+Here is the download link for the [[https://www.dropbox.com/sh/n93bzxtkrn31us5/AAA_moo_Y06RohB1bXbYjoiAa?dl=1|oSPIM firmware package from ASI]] (last updated 22-Mar-2018).  If you have newer firmware from ASI then use it (i.e. this package here is out of date).
  
 Standard firmwares for card addresses on oSPIM controllers are as follows Standard firmwares for card addresses on oSPIM controllers are as follows

Trace: • objectives