Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revision Previous revision
Last revision Both sides next revision
docs:manual:assembly [2015/06/25 23:05]
Jon Daniels [Install filters, Filter cubes and Mirrors] 		docs:manual:assembly [2015/06/26 18:29]
Jon Daniels [With 2015 piezos]
Line 81: Line 81:
 Upon re-insertion, the dovetail will “click” into position and then the set screw should be tightened. Upon re-insertion, the dovetail will “click” into position and then the set screw should be tightened.
  
-With the objectives inserted and everything reassembled, get the two objectives aligned (co-focused) “by eye” as best as possible using the bushings on both sides and the lateral adjuster. When aligned, the objectives will be symmetric when viewed from the front of the microscope and aligned forward and backward as well, as shown in Figure <imgref two_objectives_closeup>.+With the objectives inserted and everything reassembled, get the two objectives aligned (co-focused) “by eye” as best as possible using the bushings on both sides and the lateral adjuster. When aligned, the objectives will be symmetric when viewed from the front of the microscope and aligned forward and backward as well, as shown in <imgref two_objectives_closeup>.
  
 ===== Care of piezo objective movers ===== ===== Care of piezo objective movers =====

Trace: